First of all apply emergency stop 🛑 button in machine before doing below activity.
Power-off & Power-on the CNC. During power on press
buttons simultaneously until the IPL menu comes.
IPL Menu
0 : END IPL
1 : DUMP MEMORY
3 : CLEAR FILE
4 : MEMORY CARD UTILITY
5 : SYSTEM ALARM UTILI
6 : FILE SRAM CHECK UTILITY
7 : MACRO COMPILER UTILITY
8 : SYSTEM SETTING UTILITY
12 : BATCH DATA BACKUP/RESTORE
STEP 2
ENTER 12 & PRESS INPUT
Enter 12 and press INPUT.
Then another Menu will come
0 : END IPL
1 : BATCH DATA BACKUP (CNC -> MEMORY CARD)
2 : BATCH DATA RESTORE (MEMORY CARD -> CNC)
11 : BATCH DATA BACKUP (CNC -> USB MEMORY)
12 : BATCH DATA RESTORE (USB MEMORY -> CNC)
STEP 3
NOW SELECT BACKUP/RESTORE OPTION ACCORDINGLY WHAT YOU WANT
· Then select the option either BACKUP/RESTORE & press INPUT.
· Then choose (0: NO or 1: YES) option.
· Now your backup & restore will be complete. To come out enter 0: END IPL.
E.g. If you want to take back up in USB then you have to write 11 and press input then 1 and input .Your back up will be stored in USB from CNC.
Important Point: Always read comment in () bracket.CNC -> USB MEMORY means you are taking SRAM back up from CNC to USB memory.This facility is available on latest Fanuc Series after Oi-TF or Oi-MF and above
Disclaimer :The blogs shared on CNC machines are created purely for *educational purposes*. Their intent is to help readers understand CNC controls, alarms, diagnostics, and general troubleshooting methods. We strictly avoid any copyright violations, and all explanations are written only for learning and knowledge-sharing.
These blogs should not be considered as official repair or service manuals. For detailed instructions, critical repairs, or advanced troubleshooting, it is always necessary to contact and work under the guidance of the respective *machine manufacturer* or *CNC controller support team*.
The content provided is focused only on *diagnosis and awareness*. We do not take responsibility for any kind of damage, error, or malfunction that may occur if someone directly applies the information shared here without proper technical supervision.#
